- Wheel Alignment[10]
- Spray Booths[10]
- Other Vehicle Equipment[2]
- Tire Inflators[10]
- Tire Changers[7]
- Other Vehicle Tools[2]
- Jacks[10]
- Car Lifts[1]
- Hand Carts & Trolleys[7]
- Tool Cabinet[2]
- Tool Box[2]
- Contact Person : Mr. Su Jimmy
- Company Name : Zhongshan Hairuida Auto Maintenance Equipment Technology Co., Ltd.
- Tel : 86-0760-86366657
- Fax : 86-0760-86366658
- Address : Guangdong,Zhongshan City,Shengye Road, No 6, Jinwan Industry Park,Xinxu,Zhongshan City, Guangdong Province,China
- Country/Region : China
- Zip : 519000
electric tire inflator Model: BA-82
tire inflator
1, Features
1,Exclusive Whole English Or Chinese Interface, Big LCD Display,
2,Using CNSY High-Performance Solenoid Valve
3,Adopted STC High Integration And High Stability Processor.,
4,Super High Accuracy And Advanced Measuring Device From America, Make Sure Fast Rapid High Precision.
5, Inside Installed Copper Pipe Which Never Rust And Against High Pressure More Durability
6, Rapid Of Air Inflation Very Fast(One Tire/1 min), May Do Air Inflation For Four Tires At One Time
2, Technology Date
Voltage | AC220V 50Hz |
Work Temperature | -20°C~ +70°C |
Air Pump Pressure | Less Than 8Kg/CM2 Less Than 150psi |
Accuracy | ±1%+0.5psi |
Measuring Range | 0.1~ 5Kg/Square Centimeter |
Adopt Cars | Motorcycle, Cars And Minimum Van or Bus |
3, BATTLE-AXE air tire inflator work princeple
4, BATTLE-AXE wheel aligner ---air inflator machine control plate
5, ATTENTION WHNE YOU OPERATE AIRAXE3.0
1, Empty tire inflation: should be in stop status, then press air inflator button and keep it 8 seconds, then press BEGIN button begin to inflator automatically
UN-Empty tire inflation: only connect 1 and 2 , then begin air inflation.
When first UN-empty tire finished inflation, can go on inflation next tire, unnecessary to press button
2, when adjust the UNITE, need to do it under stop status
3, if you want to stop air inflation to tire, you may take the air pipe head out from tire valve directly, unnecessary to press any buttons
4, Before air inflation, check the compactness between tire valve and air pipe head needle carefully. If the tire valve is too deep, make air pipe head needle can not touch valve , or air pipe head needle’s length is short, can not reach valve ..the above two situation are all can results in air inflation Job failed, finally make inflation speed slow even can not input air at all
5, in order to make air inflation machine work well, and make sure the air accuracy + air speed, should promised the air supplier stable, it means that air compressor should be not supply big air for other machine, avoiding air inflation slow or failed
6, Warrantee
1 years, accessories free, but not including expres cost
7,Unit Exchange: kg/cm2, Psi, Mpa
electric tire inflator Model: BA-82